Basically the Split Matrix Modules work just as the Matrix Modules with 50 or 100 Outputs. The difference is that the Split Matrix Modules are ideally suited to fire pyrotechnical effects on numerous individual positions by using only one receiver. Typical applications are the installation of effects on the facades of buildings, large front pieces and the usage of pre-assembled platforms for stage FX. The modules come with four threads on the bottom side and due to that they can easily be mounted on platforms or steel ropes.
As usual all parameters of all outputs can be freely programmed and stepped. The parameters of all outputs can be edited and checked either directly at the receiver or remotely by using the controller PFC Advanced or USB Radio Modem.
Instead of a Matrix Module a so called Adapter Board is applied on top of the PFE Advanced 10 Outputs which has six connectors for multicore cables. The connection between the Adapter Board and the Split Matrix Modules is established with multicore cables.
Every Split Matrix is equipped with two connectors for the multicore cables, so that another cable can be used to connect to the next Split Matrix Board. Star shaped as well as line shaped cable networks are possible. Output 100 is used to calibrate the resistance metering and should be used as close as possible to the receiver so that the cable resistance of the additional wiring is taken into consideration when the device is measuring the resistance of the firing lines.
By using coding bridges the output group(s) a module should have can be determined. It is also allowed to use the same output group on several modules. This is equivalent to a parallel connection of e-matches.
Both, the sockets on the Split Matrix Modules and the connectors of the multicore cables as well as on the Adaptor Board are gold-plated.
Assignment of firing cues without any restrictions: Yes, 1-999
Firing voltage: 24 V
Firing current: 50 A, 17 A continuous current
Firing LEDs for each output: Yes
Source of firing energy: Rechargeable battery
Possibility to activate magnetic valves (i.e. solenoids): Yes
Usage of the stepping extension of the receiver: Yes, optional, 0.01 – 99.99 seconds, resolution 1/100 s (i.e. 0.01 s)
Simultaneous stepping sequences per device: 100
Max. firing rate: 100 firings / second
Housing: circuit board casted in silicone rubber
Dimensions Outputs: 168 x 170 x 45 mm
Net Weight Outputs: 912 g